Skip to end of metadata
Go to start of metadata

How to perform a Factory Reset

A factory reset will revert all settings on the device back to factory defaults, so if you have settings you want to remember, make sure they are documented somewhere!

Before performing a power cycle it is recommended to remove all cables and drives from the Videon device, leaving only Ethernet and power plugged in.

To perform a factory reset:

  1. Unplug power from the Videon device
  2. Hold down the front button while plugging power back in
  3. Continue to hold the front button until the front LED blinks 3 times
  4. Release the front button and wait for the device to finish booting